Let it settle
Respect the adhesive settling time in your kit instructions before exposure to water or use.
Une belle finition commence avant le premier décalcomanie
Prenez votre temps. Trouvez la bonne coupe.
Un guide de préparation pratique pour vos graphismes. Commencez par une machine propre, un test à sec et les instructions fournies avec votre kit.
Ceci est un guide général. Les instructions spécifiques aux matériaux de votre kit prévalent, notamment en ce qui concerne la préparation de la surface, la température, le mode d'application et le temps de polymérisation.
01 / Set yourself up
Ready before you peel.
Work through this checklist before removing any backing. Your progress is saved on this device.
02 / One panel at a time
The application overview.
Confirm the layout
Match each piece to its panel while the backing is still attached. Check edges, vents, fasteners and adjoining graphics. Photograph and query any mismatch before proceeding.
Prepare the surface
Follow the cleaning and surface preparation instructions for the supplied material and your panels. Let the surface dry fully. Avoid cleaners that leave a residue, and test compatibility in an inconspicuous area when appropriate.
Position before committing
Work on one piece at a time. Use the alignment method recommended for your kit, checking the position before applying firm pressure. Do not use a wet application method unless your kit specifically calls for it.
Apply with control
Peel the backing gradually and use the recommended application tool and technique. Do not force a misaligned piece into place by stretching it. Use heat only as instructed for the material and surface.
Finish and inspect
Check all edges, corners and openings. Complete any finishing or post-heating procedure specified for your kit, then allow the stated settling time before riding, handling heavily or washing.
03 / Keep it looking good
A little care goes a long way.
Wash gently
Use suitable cleaners and gentle methods. Keep high-pressure spray away from edges and seams.
Check the edges
If an edge lifts or a piece is damaged, photograph it and ask for advice before it gets worse.